4. Press P2.
5. Press the ENTER key.
6. Enter 0000.
7. Press the ENTER key.
ð The green light turns off and the acoustic signal sounds twice.
6.3.9 Activating Dual Mode (P7)
It is possible to configure the lock in such a way that 2 activated, but different codes
(different IDs) are required for lock opening e.g. the Master Code and any other second code
or any 2 other codes. The Dual Mode includes all operators (Master Code, User Codes and the
Courier Code). The Dual Mode must be deactivated before to be able to be activated.
1. Press P.
2. Enter the valid Manager Code 01XXXXXX.
01 = ID; X = valid 6-digit combination for the manager
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P7.
5. Press the ENTER key.
ð The green light turns off and the acoustic signal sounds twice.
To activate Dual Mode, it is necessary that at least 2 valid codes are active, otherwise an error
message is displayed when trying to activate Dual Mode. If the red light blinks twice and the
acoustic signal sounds twice, Dual Mode has been deactivated before. All steps must be
repeated to activate Dual Mode.
6.3.10 Deactivating Dual Mode (P7)
1. Press P.
2. Enter the valid Manager Code 01XXXXXX.
01 = ID; X = valid 6-digit combination for the manager
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P7.
5. Press the ENTER key.
ð The red light blinks twice and the acoustic signal sounds twice.
If the green light blinks twice and the acoustic signal sounds twice, Dual Mode has been
activated before. All steps must be repeated to deactivate Dual Mode.
OperationUser Manual
27- 02/2022 dormakaba Combi B 90 with metal input unit
To Next Page
Loading...
