Dormakaba Combi B 90 - Enabling User Codes or the Courier Code

6. Enter the ID to be disabled.
ID = 02 to 89 for user or 95 for the courier
7. Press the ENTER key.
8. The red light blinks twice and the acoustic signal sounds twice.
6.3.4 Enabling User Codes or the Courier Code (P4)
After a disabled code has been enabled, the code can be used.
1. Press P.
2. Enter the valid Manager Code 01XXXXXX.
01 = ID; X = valid 6-digit combination for the manager
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P4.
5. Press the ENTER key.
ð The green light is on and the acoustic signal sounds twice.
6. Enter the ID to be enabled.
ID = 02 to 89 for user or 95 for the courier
7. Press the ENTER key.
ð The green light turns off and the acoustic signal sounds twice.
Operation User Manual
24 - 02/2022dormakaba Combi B 90 with metal input unit