1 Glossary
Terms Meaning
audit Approximately 960 events (opening, closing, configuring the
lock etc.) are saved in the audit memory of the lock.
button An icon that can be clicked with the cursor.
code A numerical sequence of 8 digits which consists of an ID
and a PIN. It serves as an identification for the operator.
Courier Code By using this code it is possible to open the lock without
waiting for a defined Time Delay.
CW Confirmation Window
An adjustable time which starts after the Opening Delay
has elapsed. It is only possible to open the lock during the
set Confirmation Window.
Dual Mode 2 different valid codes are required to open the lock.
Duress Alarm When this function is activated on the lock, a Duress Alarm,
imperceptible for the intruder, will be triggered.
Emergency key By using this physical key it is possible to open the lock me-
chanically and independently at any time.
ID A fixed 2 digit number.
lockout period After entering a code 3 times incorrectly the lockout period
is activated, no code entries are possible during the lockout
period.
Manager Code If the Manager Code with the ID 01 is activated in the PC
Software, the following functions can be configured:
• Configuring or deleting OD/CW
• Activating or deactivating Dual Mode
Master Code This is the highest code in the code hierarchy
OD Opening Delay
An adjustable time which must pass before it is possible to
open the lock.
operator The master, manager, users and the courier are operators
of the lock.
PIN A freely selectable combination of 6 digits.
Setup Code By using this code it is possible to open the lock during the
assembly in the factory.
User Code By using this code it is possible to open the lock. Users can
also change their own code.
Glossary User Manual
4
- 02/2022dormakaba Combi B 90 with metal input unit
To Next Page
Loading...
