6.6 Special functions
6.6.1 Connecting the lock to the PC software
The lock has an additional mini USB interface on the input unit. It is possible to configure the
lock via this interface by using the PC software available as an accessory.
• The following functions are available when using the additional PC software:
– Reading-out audits
– Configuring the lock settings
For further information, see the User Manual Combi B 90 PC software.
6.6.2 Additional functions via the signal inputs
The lock has an option which allows implementing additional functions via the signal input.
For further information on the assignment of the signal inputs, see the Installation Manual.
It is only possible to activate an additional function with the PC software.
6.6.3 Additional functions via the signal outputs
The lock has 2 signal outputs:
• Duress Alarm
• Micro switch for the detection of the bolt position, no additional configuration is possible
OperationUser Manual
37- 02/2022 dormakaba Combi B 90 with metal input unit
To Next Page
Loading...
