Dormakaba Combi B 90 - Disabling User Codes or the Courier Code; Enabling User Codes or the Courier Code

6.2.3 Disabling User Codes or the Courier Code (P4)
After a code is disabled, the code cannot be used as long until the code will be enabled.
Keep in mind that it is not possible to disable the Master Code.
00 = ID; X = valid 6-digit combination for the Master Code
1. Press P.
2. Enter the valid Master Code 00XXXXXX.
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P4.
5. Press the ENTER key.
ð The green light stays on and the acoustic signal sounds twice.
6. Enter the ID to be disabled.
ID = 01 to 89 for user or 95 for the courier
7. Press the ENTER key.
8. The green light turns off, the red light blinks twice, the acoustic signal sounds twice.
6.2.4 Enabling User Codes or the Courier Code (P4)
After a disabled code has been enabled, the code can be used.
1. Press P.
2. Enter the valid Master Code 00XXXXXX.
00 = ID; X = valid 6-digit combination for the Master Code
3. Press the ENTER key.
ð The green light blinks twice and stays on, the acoustic signal sounds twice.
4. Press P4.
5. Press the ENTER key.
ð The green light is on and the acoustic signal sounds twice.
6. Enter the ID to be enabled.
ID = 01 to 89 for user or 95 for the courier
7. Press the ENTER key.
ð The green light turns off and the acoustic signal sounds twice.
Operation User Manual
16 - 02/2022dormakaba Combi B 90 with metal input unit