Need help?Do you have a question about the Dormakaba Saflok Quantum Pixel and is the answer not in the manual?
General| Type | Electronic Lock |
|---|---|
| Manufacturer | Dormakaba |
| Model | Saflok Quantum Pixel |
| Power Supply | Battery |
| Battery Life | Up to 2 years |
| Technology | RFID |
| Material | Metal |
| Audit Trail | Yes |
| Emergency Opening | Mechanical override |
| Wireless Communication | Yes |
| Features | Mobile Access |
Install the lower mortise into the door pocket and route the cable harness.
Assemble and secure the controller to the door, ensuring proper alignment.
Install the reader base, antenna PCB, and reader cover onto the door.
Connect the battery and test lock functionality with a keycard.
Install the inside and outside lever assemblies onto the door.
Install the thumb turn base and turn piece, ensuring proper alignment.
Secure the mortise and controller faceplates to the door.
Perform initial functional checks of the lock's operation.
Program the lock with room numbers using the HH6 device.
Install the reader cover by locating the release hole and rotating clockwise.
Conduct a final operational test after assembly to confirm performance.
Remove the reader cover using a specialized tool and specific technique.
Inspect the lock for cosmetic imperfections and proper mounting.
Verify the proper mechanical operation of the lock components.
Test keycard recognition, LED feedback, and electronic functions.
Check door closing, deadbolt engagement, and spacing tolerances.
Statement regarding FCC compliance and potential radio frequency interference.
To Next Page