Dormakaba ED200 - Regular inspection and maintenance; ED (swing doors)

9
SWING DOOR LOG BOOK
2017-11
Regular inspection
and maintenance
To be undertaken by a qualiied technician.
The following list describes what has to be done during
the maintenance of dormakaba door systems. Always
consider the mounting and operation instructions
during maintenance.
Please observe the requirements for ire doors,
emergency exits and escape routes during inspection, if
applicable. The current state of technology has to be
taken into consideration when assessing the door
system with regard to safety-related questions.
Note down any safety-relevant error/deicit in the log
book and on the performance sheet. The inspector
must note down the scope, results and date of the
inspections and the facility operator has to keep these
documents for at least one year.
ED (swing doors)
. Check operator for leaks
. Check arm and adjust/repair/replace as required
. Check door leaves for smooth running and
adjust/repair/replace as required
. Check and adjust/repair/replace all electrical and
hydraulic components as required
. Check and adjust door coordinator as required
. Check all safety equipment and adjust/repair/
replace as required
. Check and readjust all safety clearances as required
. Check all control elements and adjust/repair/replace
as required
. Perform functional test
. Check wear parts such as slide shoe once a year and
replace as required (see complete wear part list)
. Write down inspection and maintenance report in
the log book