Need help?Do you have a question about the Dormakaba ED900 and is the answer not in the manual?
General| Product Type | Swing door operator |
|---|---|
| Opening Speed | Adjustable |
| Closing Speed | Adjustable |
| Operating Modes | Automatic, manual, hold-open |
| Protection Class | IP20 |
| Material | Aluminum housing |
| Max Door Weight | 125 kg |
| Control Options | Push button, motion sensor |
| Safety Features | Obstacle detection |
| Operating Temperature | -20°C to +50°C |
| Stroke | 500 mm |
| Type | Electromechanical Swing Door Operator |
| Power Supply | 230 V AC (+6% / -10%), 50/60 Hz; 120 V AC (+6% / -10%), 50/60 Hz; 24 V DC (+15% / -10%) |
Emphasizes maintaining safety standards, decals, and labels for continued safe operation.
Defines low energy power-operated swinging doors according to the ANSI/BHMA A156.19 standard.
Outlines essential daily safety checks for ED900 operators as mandated by AAADM labels.
Lists critical daily safety checks to ensure customer and employee safety with low energy doors.
Provides recommendations for periodic safety checks, including housekeeping and door integrity.
Mandates the 'AUTOMATIC CAUTION DOOR' decal for all low energy doors, specifying placement.
Requires 'ACTIVATE SWITCH TO OPERATE' decals for doors initiated by knowing act devices.
Specifies 'PUSH TO OPERATE' and 'PULL TO OPERATE' decals for manually operated doors.
Explains the function of the Red, Yellow, and Green LEDs indicating system status and maintenance.
To Next Page
