Need help?Do you have a question about the Dormakaba ED 100 and is the answer not in the manual?
General| Push & Go function | Yes |
|---|---|
| Protection class | IP20 |
| Operating temperature | -20 °C to +50 °C |
| Housing material | Aluminum |
| Type | Electromechanical swing door operator |
| Power Supply | 230V AC, 50/60Hz |
| Max Door Weight | 100 kg |
| Opening Speed | Adjustable |
| Closing Speed | Adjustable |
| Safety Features | Obstacle detection |
| Opening Angle | Adjustable, max. 110° |
| Hold-Open Time | Adjustable |
Specifies that ED 100/250 are for automatic opening and closing of swing doors up to 160/400 kg.
States that unauthorized modifications void liability and use of unapproved accessories is not covered.
Provides essential safety guidelines for the operation and installation of the door system.
Highlights that only qualified persons may open the mains connection unit and to de-energize before removing covers.
Warns of crushing and squeezing risks at automatic door closing edges.
Warns about squeezing and crushing risks from slide rail lever and arm assemblies.
Addresses residual risks, suggesting crush protection measures are not included in scope.
Explains the electromechanical operation of ED 100/250 drives and their automatic opening/closing functions.
Details the four selectable functions (OFF, AUTOMATIC, PERMANENT OPEN, EXIT ONLY) for the drive unit.
Describes the location and function of the power switch and internal/external program switches.
Lists key technical specifications including ambient temperature, power supply, protection class, and operating noise.
Explains connection of various activators (inside, outside, night/bank, intercom) to the drive unit.
Details manual locking procedures and the recommendation for a door lock switch to prevent damage.
Describes operation in low-speed (safer) and high-speed (requiring sensors) energy modes.
Explains how safety sensors detect obstacles during opening/closing and their response.
Describes the service interval display using a yellow LED for required maintenance work.
Details operation in hold-open systems for smoke/fire doors and manual closing functions.
Explains the operation for barrier-free WC access, including status displays and user interaction.
Discusses compatibility of dormakaba and third-party accessories, potential issues, and warranty.
Outlines responsibilities for system inspection, initial acceptance, and annual checks by specialists.
Lists wear parts like arm assembly, sliding piece, and slide channel requiring annual checks and potential replacement.
Provides instructions for cleaning the drive unit safely, avoiding liquids and electrical shock hazards.
Highlights the benefits of premium maintenance services for increased lifespan and reliability.
Addresses common functional errors, error indications via LED, and basic reset procedures.
Guides users through checking basic conditions like power, door movement, and function selection for error resolution.
Instructs on safe disassembly by qualified personnel and environmentally friendly disposal of the product.
Declares compliance of ED 100/250 products with EC Directives and applied standards.
Declares compliance of ED 100/250 as an incomplete machine with Machine Directive requirements.
To Next Page
