3.11 Accessories
In addition to an extensive range of dormakaba accessories,
many activators, locking devices, safety sensors and further
accessories of other manufacturers are available that could be
operated with the operators ED 100 and ED 250.
Should the accessories not be part of the scope of delivery of
dormakaba, then dormakaba cannot guarantee the compatibility.
If these devices are used anyways, the full functional range of
the drive may not be available or the device may not function pro-
perly. The drive unit or the connected device may also become
damaged and the warranty might become void.
4. Maintenance and care
Maintenance
Maintenance work must be carried out only with the system
de-ernergized (turn off the fuse protection on site).
Acceptance and regular inspection
As the operator of the automatic door, you are responsible for
the regular inspection of the system. An initial inspection is
required before the initial commissioning. The acceptance must
be carried out according to the inspection book by a person
trained by dormakaba. The door system is then to be inspected
and maintained, if necessary, at least once a year by a specialist.
All inspections will be documented in the inspection book (from
page 8 in these operating instructions). It serves as proof that
you have fulfilled your obligations and it must be retained.
Have the door system inspected and maintained, if necessary, at
least once a year by a specialist.
The testing and approval must be carried out according to the
inspection book by a person trained by dormakaba.
The results are to be documented and to be retained by the
operator for at least 1 year.
The following parts are wear parts and need to be checked at
least once a year and replaced, if necessary (see installation
instructions):
• Arm assembly
• Sliding piece
• Slide channel
Use only original spare parts.
Care
Turn the program switch during the cleaning to the OFF
position or PERMANENT OPEN position in order to prevent
unintended movements.
Never let water or other other liquids enter the drive unit.
Never insert a metal object into the openings of the drive
unit. Otherwise, there will be the risk of an electrical shock.
Clean the drive with a moist cloth and common cleaning agents.
Do not use any scrubbing agents as they might damage the
surface. Do not start the device before the surfaces are dry.
5. Maintenance by dormkaba
A regular maintenance of your system will pay off:
weak spots are detected and eliminated early, the service life will
be increased.
dormakaba and its authorized partners offers a premium
maintenance service for automatic doors and catching devices,
whereby the offcial seal of approval provides the operators of the
building with reliable safety. If not all door systems are properly
tested, the building operator will be liable for property dama-
ge and physical injuries in case of an accident. Irrespective of
safety aspects, a regular maintenance makes also sense from an
economic point of view. This allows you to detect and eliminate
possible damage or wear early on. The risk of unforeseeable costs
due to, for example, high repair costs can be minimized – and we
will help you keeping an eye on your budget. The goal is always to
increase the service life of your door systems.
dormakaba will assume the complete organization and execution
of the maintenance. Your benefits: all installations will be tested
by trained experts in regular intervals - even systems from other
manufacturers. The building operator does not have to take care
of anything; legal requirements will be met in a reliable manner.
A maintenance contract for the door will ensure the tested relia-
bility according to a premium standard.
We want to convince you as well – let us prepare you a non-bin-
ding and free quote for a maintenance contract.
For more information on this topic and many others on the
dormakaba service, please go to our homepage at
www.dormakaba.com.
5
2019-01
dormakaba
ED 100, ED 250
User manual
WN 058176 45532
Maintenance and care
To Next Page
Loading...
Need help?
General
