Saffire
TM
EVO Wi-Fi Lock PK519348 03-23
2
dormakaba Saffire
TM
EVO
User Guide
Important information before you start
• Saffire EVO is intended to be managed with approved dormakaba Lyazon Cloud API partner systems.
• The lock is designed to be installed in an online environment with stable Wi-Fi.
Lyazon Utility App for commissioning and setup
The Lyazon Utility App is available to download for both iOS and Android devices. To download, please visit the App Store or Google
Play Store and search for ‘Lyazon Utility’ app.
Note about permission to use commissioning app: To receive a username and password for the app, installers need to be invited by an
approved dormakaba Lyazon integration partner. Please contact your integration partner if you have not yet received a username and
password.
Wi-Fi recommendations
• The Saffire EVO lock must be connected to a 2.4Ghz Wi-Fi network (802.1 b/g/n)
• Minimum Wi-Fi signal should be -70 dB at the lock
• If possible, set adjacent Wi-Fi access points to utilize different channels to minimize interference
Insufficient Wi-Fi
Although Saffire EVO with Lyazon is intended to be an online solution, if there is a door with insufficient Wi-Fi, the following
recommendations may assist in managing the lock temporarily.
• Bring a mobile Wi-Fi hotspot or access point to the door
› Hotspot must use the same SSID and password as the lock
› A minimum Wi-Fi signal of –70 dB at the door is required
• If the lock has been offline, the lock may take a few minutes to fully update once online
To Next Page
Loading...
