Doro 5030 - Sound & Display; Audio Setup; Tone Setup (Ringtone)

English
Add new devices or view saved.
1. Press Menu
Settings Bluetooth My device.
2. Select device from the list and press Options:
• Rename to change the name of the device.
• Delete to delete the device from the list.
• Delete all to delete all devices from the list.
3. Press OK to confirm.
Audio path
1. Press Menu
Settings Bluetooth Audio path:
• Phone to answer incoming calls with the phone.
• Forward BT to forward incoming calls to the Bluetooth
®
device.
2. Press OK to confirm.
Sound & Display
Note! Silent needs to be set to Off to access Tone setup, Volume, Alert
type and Extra tone.
Audio setup
If you use a hearing aid or have hearing difficulties when using the device
in a noisy environment, you can adjust the audio settings.
1. Press Menu
Settings Sound Audio setup:
• Normal for normal hearing in normal conditions (default).
• High for moderate hearing impairment or use in a very noisy
environment.
• HAC mode for use with hearing aid.
2. Press OK to confirm.
Note! Try different settings to find the one that suits your hearing the best.
Tone setup (ringtone)
Select a ringtone with the best tone curve adjustments and frequencies to
best fit your needs.
1. Press Menu
Settings Sound Tone setup Ringtone.
2. Use
/ to select one of the available melodies, the melody is
played.
25