Doro 5031 - Call divert settings; Call barring configuration

English
3. Press OK to confirm.
Tip: Repeat and select Deactivate to disable call waiting, or Query status
to display if call waiting is active or not.
Answer mode
1. Press Menu Settings Calls Answer mode.
2. Select Any key
On to be able to answer incoming calls by press-
ing any button (exemption
).
3. Press OK to confirm.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status for each.
1. Press Menu
Settings Calls Call setup Call divert:
• Voice calls to divert all voice calls.
• Unreachable to divert incoming calls if the phone is turned off
or out of range.
• No reply to divert incoming calls if unanswered.
• If busy to divert incoming calls if the line is busy.
• Cancel diverts to cancel all call divert settings.
2. Press OK to confirm.
Caller ID
Display or hide your phone number on the recipient's phone when you
call.
1. Press Menu
Settings Calls Call setup Caller ID:
• Set by network to use default setting by the network.
• Hide ID to never show your number.
• Send ID to always show your number.
2. Press OK to confirm.
Call barring
Your phone can be restricted to disallow certain types of calls.
12