English
Sound & Display
Note! Silent needs to be set to Off to access Tone setup, Volume, Alert
type and Extra tone.
Audio setup
If you use a hearing aid or have hearing difficulties when using the device
in a noisy environment, you can adjust the audio settings.
1. Press Menu
Settings Sound Audio setup:
• Normal for normal hearing in normal conditions (default).
• High for moderate hearing impairment or use in a very noisy
environment.
• HAC mode for use with hearing aid.
2. Press OK to confirm.
Note! Try different settings to find the one that suits your hearing the
best.
Tone setup (ringtone)
Select a ringtone with the best tone curve adjustments and frequencies
to best fit your needs.
1. Press Menu
Settings Sound Tone setup Ringtone.
2. Use
/ to select one of the available melodies, the melody is
played.
3. Press OK to confirm or Back to discard changes.
Tip: Set up the Alarm, Message tone, Keypad tone, Power on and Power
off in the same way.
Ringtone volume
1. Press Menu Settings Sound Volume.
2. Use
/ to change the ringtone volume.
3. Press OK to confirm.
Silent
1. Press Menu Settings Sound Silent.
2. Select On to enable, or Off to disable.
26
To Next Page
Loading...
