English
Turn the phone on and off
1. Press and hold on the phone to turn it on or off. Confirm with
Yes to power off.
2. If the SIM card is valid but protected with a PIN code (Personal Iden-
tification Number), PIN is displayed. Enter the PIN code and press
OK (
upper left corner of keypad). Delete with Clear ( upper
right corner of keypad).
Note! If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more at-
tempts remain, PIN blocked is displayed. The SIM card must then be un-
locked with the PUK code (Personal Unblocking Key).
1. Enter the PUK code and confirm with OK.
2. Enter a new PIN code and confirm with OK.
3. Re-enter new PIN code and confirm with OK.
Start-up wizard
When starting the phone for the first time, you can use the Start-up wiz-
ard to set some basic settings.
• Press Yes to change or No if you do not want to change.
The default language is determined by the SIM card. See Phone settings,
p.5 on how to change language, time and date.
Tip: You can run the start-up wizard later if you want. From standby
mode, press Menu
Settings General Start-up wizard.
Navigate the phone
Standby (idle mode)
When the phone is ready to use, and you have not keyed in any charac-
ters, the phone is in standby.
• Press
to return to standby mode.
• Press left selection button
to access the phone Menu or right
selection button
Name to access your saved contacts in the
phonebook.
Tip: You can always press
to return to standby.
3
To Next Page
Loading...
