English
Idle display
In standby mode the display can show clock only, clock and the service
provider, or all information.
1. Press Menu
Settings Display.
2. Select Idle display
Clock only, Clock & Operator, All info or No
information.
3. Press OK to confirm.
LCD backlight
Select the delay time for the display backlight.
1. Press Menu
Settings Display.
2. Select LCD backlight
15 sec., 30 sec. or 1 min.
3. Press OK to confirm.
Brightness
You can adjust the brightness of the display.
1. Press Menu
Settings Display.
2. Select Brightness
Level 1, Level 2 or Level 3.
3. Press OK to confirm.
Additional functions
Alarm
1. Press Menu Alarm On.
2. Enter the alarm time using the keypad and press OK to confirm.
• Select Single to set one single alarm.
• Select Repeated to repeat the same alarm time several days.
Scroll through the list of days and press On to enable or Off to
disable the alarm for each day.
3. Press Save to confirm.
Tip: To edit an alarm, press Edit or Off to stop the alarm.
Snooze or stop
When the alarm sounds:
• Select Stop to stop.
28
To Next Page
Loading...
