www.doro.com
Note! All illustraons are for illustrave purposes only
and may not accurately depict the actual device. The
items supplied with your phone might vary depending
on the soware and accessories available in your region
or oered by your service provider. You can obtain
addional accessories from your local Doro dealer. The
supplied accessories provide the best performance with
your phone.
Full user manual
For the full user manual, useful links and more
informaon please visit www.doro.com/support/
or contact our Helpline.
With the Doro 6050 you’ll enjoy easier calling,
messaging, picture taking and more thanks to
widely separated, high contrast keys and a large 2.8”
screen. It also combines great sound with so touch
coang and many addional features including
e-mail, Assistance buon and HAC (Hearing Aid
Compability).
1. GET STARTED
Be careful not to damage your ngernails when you
remove the baery
cover. Do not bend or
twist the baery
cover excessively as it
may be damaged.
The arrow (â) indicates next acon in step-by-step
instrucons. To conrm an acon, press
OK
. To select
an item, scroll or highlight the item using /
and then press
OK
.
The external display shows the me, a number of
status indicators and nocaons for incoming calls.
If the external display mes out, press and hold any
of the side keys +/ to turn it back on.
When the phone is ready to use, and you have not
keyed in any characters, the phone is in standby (idle
mode).
• Press to return to standby mode.
• Press le selecon buon to access the phone
Menu
or right selecon buon
Name
to access
your saved contacts in the phonebook.
• Press the arrow buons / to scroll and
to select.
You can always press to return to standby.
Use
0
and
2
–
9
to speed dial an entry from
standby.
• Press and hold the corresponding buon to dial.
1. Press
Menu
â
â
â
.
2. Select
0
â
and select an entry from the
phonebook.
3. Press
OK
to conrm.
4. Repeat to add speed dials for buons
2
–
9
.
4. SOS CALLS
As long as the phone is switched on, it is always
possible to place an SOS call by entering the main
local emergency number for your present locaon
followed by .
Doro 6050
Quick Start GuideQuick Start Guide
GB
Remove the baery if it is already installed. Locate
the SIM card holder and
gently slide the card in the
holder.
See the label right next to
the holder for guidance on
how to insert the card.
This device accepts micro
SIM or 3FF SIM card. If you
have problem to remove/
replace the SIM card, use
adhesive tape on the
exposed part of the SIM
card to pull it out.
Locate the SD card holder and gently slide the card
in the holder. The device works with or without a
SD card installed. Compable card type: microSD,
microSDHC.
Insert the baery by sliding it into the baery
compartment with the
contacts facing
downwards to the right.
Replace the baery cover.
CAUTION
Only use baeries, charger and accessories that
have been approved for use with this parcular
model. Connecng other accessories may be
dangerous and may invalidate the phone’s type
approval and guarantee.
When the baery is running low, is displayed
and a warning signal is heard.
• Connect the mains adapter to a wall socket and
to the charging socket
y
or place the device
in the cradle.
Alternavely connect the cable to the charging
socket
y
on the phone and to a USB port on
a computer.
2. GET TO KNOW YOUR PHONE
1. Press and hold the red buon on the phone
to turn it on/o. Conrm with
Yes
to power o.
2. If the SIM card is valid but protected with a PIN
code (Personal Idencaon Number),
PIN
is
displayed. Enter the PIN code and press
OK
.
Delete with
Clear
.
Note! If PIN and PUK codes were not provided with your
SIM card, please contact your service provider.
It is recommended to remove the protecve plasc
lm from the display to enhance the visibility.
shows the number of PIN aempts le.
When no more aempts remain,
is
displayed. The SIM card must now be unlocked with
the PUK code (Personal Unblocking Key).
1. Enter the PUK code and conrm with
OK
.
2. Enter a new PIN code and conrm with
OK
.
3. Re-enter the new PIN code and conrm with
OK
.
When starng the telephone for the rst me,
you can use the start-up wizard to set some basic
sengs.
You can run the start-up wizard later if you want.
Enter text
• Press a numerical key repeatedly unl the
desired character is shown. Wait a few seconds
before entering the next character.
• Press
*
for a list of special characters. Select
the desired character with / and press
OK
to enter it.
• Use / to move the cursor within the text.
• Press
#
to cycle upper case, lower case and
numerals.
• Press and hold
#
to change wring language.
In some languages you can use the Smart ABC (T9)
input method which uses a diconary to suggest
words.
1. Press
Menu
â
â
Messages
â
.
2. Select
On
to enable, or
to disable.
3. Press
OK
to conrm.
The default language is determined by the SIM card.
Refer to the full manual on how to change language,
me and date.
Use the side buons + / – or / to adjust
the sound volume during a call. The volume level is
indicated on the display.
Silent is a xed prole with keypad tone, message
tone and ring tone disabled, while vibraon, tasks
and alarm are unchanged.
• Press and hold
#
to acvate and to deacvate
silent.
3. CALLS
1. Enter the phone number including the area
code. Delete with
Clear
.
2. Press to dial. Press
to cancel the call.
3. Press to end the call.
Note! For internaonal calls, always use + before the
country code for best operaon. Press
*
twice for the
internaonal prex +.
1. Press
Name
to open the phonebook.
2. Use / to scroll through the
phonebook, or quick search by pressing the key
corresponding to the rst leer of the name.
3. Press
â
alternavely, press to
dial the selected entry, or press
to return to
standby.
1. Press to answer, or press
to switch o
the ring signal and then
to reject the call
(busy signal).
Alternately, press to reject the call directly.
2. Press to end the call.
During a call the selecon buons ( ) give access to
addional funcons.
5. CALL LOG
Received, missed, and dialled calls are saved in a
combined call log. 20 calls of each type can be stored
in the log. For mulple calls related to the same
number, only the most recent call is saved.
1. Press to nd your call log.
2. Use / to scroll through the call log.
=
=
=
3. Press to dial, or
.
6. PHONEBOOK
The Phonebook can store 300 entries with 3 phone
numbers in each entry.
1. Press
Menu
â
â
â
.
2. Enter a
Name
for the contact. Delete with
Clear
.
3. Use / to select
,
Home
or
,
and enter the phone number(s) including the
area code.
4. Select
to add an email address.
5. Select
â
.
•
to use the camera to take a picture.
•
to select an exisng picture.
6. Select
â
.
• System to select from pre-installed les.
• User to select from your downloads.
7. Press
Save
.
8. When done, press
Save
.
7.
In the event of a trauma, it is crical to have this
informaon as early as possible to increase the
chances of survival. Add ICE contact to improve your
own safety. First responders can access addional
informaon such as medicaon and next of kin from
your phone in case of an emergency. All elds are
oponal, but the more informaon provided the
beer.
1. Press
Menu
â
â
ICE
.
2. Use / to scroll the list of entries.
3. Press
to add or edit informaon in each
entry. Delete with
Clear
.
4. Press
Save
when done.
8. ASSISTANCE BUTTON
The assistance buon allows easy access to contact
your predened help numbers should you need
help. Make sure that the assistance funcon is
acvated before use. See the full manual on how to
acvate, how to enter recipients in the numbers list,
and how to edit the text message.
1. When help is needed, press and hold the
assistance buon for 3 seconds, or press it twice
within 1 second.
The assistance call begins aer a delay of 5
seconds. In this me you can prevent a possible
false alarm by pressing .
2. An assistance text message (SMS) is sent to all
recipients.
3. The rst recipient in the list is dialled. If the call
is not answered within 25 seconds, the next
number is dialled.
Dialling is repeated 3 mes or unl the call is
answered, or unl is pressed.
CAUTION
When an assistance call is acvated the phone is
pre-set to handsfree mode. Do not hold the device
near your ear when the handsfree mode is in use,
because the volume may be extremely loud.
• Press
Menu
â
â
.
9. MESSAGES
1. Press shortcut buon ,
or press
Menu
â
Messages
â
â
SMS.
2. Write your message, then press
To
.
3. Select a recipient from
.
Alternavely, select
to add
recipient manually and press
Done
.
4. Select
to add more recipients.
You can modify the recipients by selecng one
and press
â
/
Delete
/
Delete all
.
5. When done, press
.
English
25 24
21
18
19
17
22
2
3
7
4
5
6
8
14
13
12
10
16
11
15
20
9
23
24
1. Earpiece
2. Display
3. Le selecon buon
4. Call buon
5. Top 10 shortcut
6. Camera shortcut
7. Voice mail
8. Microphone
9. Internaonal prex/
Symbols
10. Input method/Silent
11. Torch shortcut
12. Message shortcut
13. End call /
Power on/o
14. Right selecon
buon
15. Arrow buons
16. Camera lens
17. Torch
18. External display
19. Assistance buon
20. Loudspeaker
21. Volume control
22. Charging socket
23. Headset socket
24. Lanyard hold
25. Charging stand
To Next Page
Need help?
General
Weight and Dimensions
