Doro 6531 - Receive a Call; Call Information; Call Options

English
3. Press Options Call to dial the selected entry. If needed, select
the number.
Alternatively, press
to dial.
4. Press Abort or
to cancel the call.
Receive a call
1. Open the flip and press to answer.
Alternatively press Silent to switch off the ringsignal
or press
/close the flip to reject directly (busy signal).
2. Press
to end the call.
To answer an incoming call by opening the flip, see Answer mode, p.12.
Tip: Press and hold +/– to temporarily switch off the ringsignal without
opening the flip.
Call information
During a call, the outgoing or incoming phone number and the elapsed
call time is displayed. If the identity of the caller is withheld, Unknown is
displayed.
Call options
During a call the selection buttons
1
( ) give access to additional
functions.
Options (left selection button)
• Hold/Retrieve to hold/retrieve the current call.
• End single call to end the current call (same as
).
• New call to call another number (Conference).
• Phonebook to search the phonebook.
• Messages to write or read text messages.
• Mute to disable the microphone.
SPK on (right selection button)
The loudspeaker allows you to speak without holding the phone close to
the ear.
10
1. Selection buttons have multiple functions. The current function is shown
above the selection button on the display.