Doro 6531 - Activate Text Messages (SMS); Position SMS

English
2. Select Empty Add Phonebook to add a contact from the
phonebook.
Alternatively, press Manual to add names or numbers manually. See
Add contact, p.15.
3. Press OK to confirm.
4. Repeat until you have 5 contacts (maximum).
Tip: To edit or delete an existing entry, select it and press Options
Edit or Delete.
Activate text messages (SMS)
A text message can be sent to the contacts in the numbers list when the
assistance button is pressed.
Activation
1. Press Menu
Settings Assistance SMS Activation:
• On to send a text message before calling.
• Off to call without sending a text message first.
2. Press OK to confirm.
Create assistance message
1. Press Menu
Settings Assistance SMS Message.
2. Select Edit and write the message, see Enter text
, p.5.
3. Press OK to confirm.
Note! You must write a message if you activate the SMS function.
Position SMS
This function sends a text message with the users position to the recipi-
ents in Number list when an assistance call occurs. The message con-
tains date, time, and the positioning information of the Doro user. The
message is not editable. If no position can be found the message con-
tains the latest known position.
The positioning message is sent after the editable assistance message,
but before the assistance call sequence starts.
Activation
1. Press Menu Settings Assistance Position SMS .
2. Select On to enable, or Off to disable.
21