Doro 6621 - Position SMS; Assistance Settings

English
Create assistance message
1. Press Menu
Settings Assistance SMS Message.
2. Select Edit and write the message, see Enter text
, p.5.
3. Press Ok to confirm.
Note! You must write a message if you activate the SMS function.
Position SMS
This function sends a text message with the users position to the recipients
in Number list when an assistance call occurs. The message contains date,
time, and the positioning information of the Doro user. The message is not
editable. If no position can be found the message contains the latest
known position.
The positioning message is sent after the editable assistance message, but
before the assistance call sequence starts.
Activation
1. Press Menu Settings Assistance Position SMS .
2. Select On to enable, or Off to disable.
3. Press Ok to confirm.
Assistance settings
Confirm with "0"
You can activate the Confirm with "0" function. This is especially recom-
mended if there is a risk that the assistance call is answered by a voice mail
or answering service. If the recipient doesn’t press
0
within 60 seconds
the call will be disconnected and the next number in the sequence will be
called. If the recipient presses
0
within 60 seconds, the call is confirmed
and no further call attempts will be made (assistance sequence
interrupted).
1. Press Menu
Settings Assistance Confirm with "0".
2. Select On to enable, or Off to disable.
3. Press Ok to confirm.
Signal type
Select the notification signal type for the assistance sequence.
1. Press Menu
Settings Assistance Signal type:
22