English
2. Set the switch Enhanced 4G LTE Mode to to activate it or
to deactivate.
Wi-Fi calling settings
For improved voice communications over Wi-Fi when mobile network cov-
erage not is optimal. This feature is only available for selected service
providers.
1. Press and hold Settings Network & Internet Mo-
bile network select SIM card (if applicable) Wi-Fi calling.
2. Set the switch to on to activate it or to deactivate.
3. You can also set the preferred calling type with Calling preference:
• Wi-Fi preferred for calls over the Wi-Fi network as first priority.
• Mobile preferred for calls over the mobile network as first
priority.
See alsoCalls (call settings) / Wi-Fi Calling, p.42.
Access Point Names
Note! See Enter characters , p.10 on how to enter characters.
An Access Point Name (APN) is the name of a gateway between a mobile
network and another computer network, mostly the public Internet. The
APN settings are used by services that communicates using other computer
networks. The APN settings for most major service providers are already in-
cluded from start. There are different APN settings for different services
like message, data and AGPS.
Follow the steps below if your service provider’s profile is not in the list or
if you need to change any setting. Contact your service provider for correct
settings.
1. Press and hold Settings Network & Internet Mo-
bile network select SIM card (if applicable) Access Point
Names.
2. To change and existing APN profile, select a profile and press .
If your service provider’s profile is not in the list, press New
APN to enter settings for your service provider:
• Name to enter a name for the APN.
29
To Next Page
Loading...
