Doro 780X IUP - Page 49

English
CAUTION
If you turn off location, services such as assistance location cannot
access your location information.
1. Press and hold Settings Security & location
Location.
2. Enable the switch to enable location positioning.
Mode
The GPS is quite battery consuming. If you want to reduce the battery con-
sumption you can set Mode to Battery saving.
1. Press and hold Settings Security & location
Location.
2. Enable the switch to enable location positioning.
Select mode:
• High accuracy: for best location accuracy. This uses every service
available: GPS, Wi-Fi, Bluetooth, and/or mobile networks in what-
ever combination available. This is quite battery consuming.
• Battery saving: to reduce battery consumption by disabling GPS.
This mode uses less battery-intensive location sources (Wi-Fi,
Bluetooth, and/or nearby mobile) to figure out where you are us-
ing location services. This will not be as accurate as using GPS.
• Device only: this mode relies solely on the GPS. This means it will
work in places where you won't find enough Wi-Fi, cellular tow-
ers, and Bluetooth beacons to get a proper location.
3. It’s also possible to enable/disable what app/function should be given
permission to location information. Press App-level permissions and
enable the switch to enable location positioning for each app/
function.
SIM card lock
Note! See Enter characters , p.10 on how to enter characters.
1. Press and hold Settings Security & location SIM
card lock select SIM card (if applicable).
• Set the switch to activate the PIN code. You need to enter
the PIN code every time the phone is started.
44