on the phone to turn it on/off. Con-
firm with Yes to power off.
If the SIM card is valid but protected with a PIN code (Personal Identifica-
tion Number), PIN is displayed.
• Enter the PIN code and press OK (
upper left corner of keypad).
Delete with Clear (
upper right corner of keypad).
Note! If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more at-
tempts remain, PIN blocked is displayed. The SIM card must now be un-
locked with the PUK code (Personal Unblocking Key).
1. Enter the PUK code and confirm with OK.
2. Enter a new PIN code and confirm with OK.
3. Re-enter new PIN code and confirm with OK.
Start-up wizard
When starting the phone for the first time, you can use the Start-up wiz-
ard to set some basic settings.
• Press Yes to change or No if you do not want to change.
Tip: You can run the Start-up wizard later if you want, see Start-up wizard,
p.23.
Changing the language, time and date
The default language is determined by the SIM card. See General, p.22
on how to change language, time and date.
Phone indicators
LED light on the phone will:
• Flash green when you have a new message or a missed call. After
reading the new message/missed call, the flashing will stop.
• Flash red when the battery is running low and during charging.
3
To Next Page
Loading...
