Dover MagLink LX4 - Page 23

Connector Specification
CN1 Not Used
CN2
Relay 1 Connector
1 - Normally Closed
2 - Common
3 - Normally Open
CN3
Relay 2 Connector
1 - Normally Closed
2 - Common
3 - Normally Open
CN4
Relay 3 Connector
1 - Normally Closed
2 - Common
3 - Normally Open
CN5
Relay 4 Connector
1 - Normally Closed
2 - Common
3 - Normally Open
CN10
Digital input connector (Activated with a positive voltage)-DEEP 3 OFF
1 - GND (activated with a positive voltage)
2 - Input 1
3 - Input 2
4 - Input 3
5 - Input 4
6 - Input 5
7 - Input 6
CN10
Digital input connector (Activated with a positive voltage)-DEEP 3 ON
1 - GND (activated with a positive voltage)
2 - Not Enabled
3 - +12 VDC (theft protection)
4 - Not Enabled
5 - Not Enabled
6 - Not Enabled
7 - Not Enabled
CN11 Main Board Connector
The table that follows identifies the Connectors and related status LEDs:
M2050-EU Rev.: 1 Dover Fueling Solutions
Page 23