Need help?Do you have a question about the Dover Petro Vend FSC3000 and is the answer not in the manual?
General| Brand | Dover |
|---|---|
| Model | Petro Vend FSC3000 |
| Category | Controller |
| Language | English |
Explains various safety alert symbols and their meanings.
Describes the meaning of different information panels used in the manual.
Provides crucial safety instructions for installers and code compliance.
Details precautions for handling ESD-sensitive components to prevent damage.
States compliance with FCC Rules & Regulations regarding interference.
Covers general warnings and specific safety guidelines for coin cell batteries.
Differentiates between older DigiServe and newer Lantronix main boards for FSC3000.
Provides key technical details for the FSC3000, including remote vs. integrated configurations.
Lists and illustrates the main components and exploded views of the FSC3000.
Describes the various ports on the FSC3000 and their functions.
Details the installation procedures for the FSC3000, including conduit requirements.
Explains physical setup options, including baud rate settings and PC connections.
Guides through the initial startup process (Cold-Start) and software configuration.
Explains how FSC3000 directly controls dispensers via manufacturer protocols.
Lists required parts and conduit requirements for DPC installation.
Details installing the DPC interface in a remote enclosure for specific brands.
Guides installing a DPC interface within a terminal pedestal.
Covers the installation of a DPC interface specifically for Gasboy dispensers.
Explains jumper settings for Wayne/Gilbarco DPC interface boards.
Describes the DTC method using dispenser's built-in card terminal.
Provides diagrams illustrating Wayne and Gilbarco DTC installations for different dispenser counts.
Outlines the installation procedure for a DTC remote enclosure.
Details specific physical configuration for Wayne CAT terminals.
Explains specific physical configuration for Gilbarco CRIND terminals.
Refers to a guide for DTC software configuration.
Provides basic maintenance checks for the FSC3000.
Covers maintenance for cabinets, displays, keypads, and door locks.
Details maintenance for remote enclosure cabinets and door locks.
Outlines preventive maintenance procedures for the journal printer.
To Next Page