3.1.8 Install a DPC Interface for Gasboy®
Part # Part Description Qty
51-0357 Universal Mounting Plate 1
50-0008 8-32 KEPS Nuts 4
75-2036 Isolated Converter (RS-232 to RS 422/485) 1
20-1519-04 RJ45 to DB9 Cable Assembly 1
07-3004 Power Supply 1
50-2144 1" x 1" Self-lock Adhesive Fasteners 4
20-1618 CABLE PCM MASTER 1
12-1015 Power Cable 1
3.1.8.1 Remote DPC Interface for Gasboy Installation
1. Attach the power supply (07-3004) and isolated converter (75-2036) to the mounting plate (51-0357)
with the four (4) 1-inch self-lock adhesive fasteners (50-2144).
2. Install the mounting plate with power supply and converter attached within 5' (1.52 m) of the FSC3000.
3. Plug the serial cable (P/N: 20-1519-04) into the isolated converter 9-pin port and then into Port 4 of the
FSC3000.
4. Install the pump communication wiring to the converter as shown in the illustration above.
M1700 FSC3000 Installation Manual | Dover Fueling Solutions 58
To Next Page
Loading...