Dover Petro Vend FSC3000 - Gilbarco D-Box Connection to DPC Board

3.1.6.2 Gilbarco D-Box Connection to DPC Board
Gilbarco Universal Distribution Box connected to DPC interface. Make sure that the Gilbarco is setup for
current loop.
l Connect the cable (P/N "12-3004" on page 50) from CN 4 of the DPC Interface to Port 4 on the
FSC3000 controller.
NOTE: The cable can be extended up to 50" (15.2 m).
M1700 FSC3000 Installation Manual | Dover Fueling Solutions 53