Dover Markem-Imaje 5200 - Page 6

Safety - Installation
Instructionmanual
6
■ Automatic Startup
DonotallowanautomaticpackagingmachinestartupafteraModel
5200/5400reset.TheModel5200/5400enduserisresponsiblefor
conguringthesoftwareandinstallingthestatusoutputsignaloption
inawaythatrequirestheoperatortomanuallyrestartthepackaging
machineafteraModel5200/5400conditionhasbeencleared.Any
deviationfromthismethodisunsafeandanyconsequencesshallbe
undertheentireresponsibilityoftheuser.
■ Use
The printer is designed for drop-on-demand ink jet printing for
industrialpackagecoding.Anyotheruseoftheprinterisprohibited,
andanyconsequencesshallbeundertheentireresponsibilityofthe
user.
■ Handling
Aprintheadatoperatingtemperaturemustnotbemoved.Toprevent
printheaddamage,thehotprintheadmustrstbecooleddownusing
theShutdownfeatureandthenpoweredoffbeforebeingmoved.
Weightofprintstation(notincludingumbilicallines):
Model5200:Approx.63kg(140lb)
Model5400:Approx.77kg(170lb)
Printhead:Approx.2.1kg(4.6lb)
Regardingthesystemweight,handlingtaskshavetobeperformed
bymorethanoneoperator.