Need help?Do you have a question about the Dr. Storage F1 and is the answer not in the manual?
Details the components and wiring diagram for the Dr.Storage F1 model.
Details the components and wiring diagram for the Dr.Storage X2B model.
Details the components and wiring diagram for the Dr.Storage A1B model.
Details the components, controls, and wiring diagram for the T40W model.
Details the components, controls, and wiring diagram for the T60M model.
Instructions for leveling the cabinet and installing shelves using different clip methods.
Guides on installing stoppers and connecting internal modules according to wiring diagrams.
Procedures for bin setup, interior light modes, and overheat protector settings.
Explains the control panel buttons, displays, and the sensor calibration reminder.
Details on setting upper humidity limits and time delays for flash/buzzer alarms.
Details on setting upper temperature limits and time delays for flash/buzzer alarms.
Step-by-step guide to set the desired relative humidity level for A1B models.
Steps to set temperature and notes on performance based on ambient conditions.
Instructions for installing the USB-RS232 driver and the Humidity Manager software.
Overview of the software interface, data scales, curves, and time lines.
Steps for connecting the cabinet, setting intervals, and saving data.
How to use the Floor Life Counter to track usage and performance.
Guidelines for cabinet placement, environment, and initial operation.
Critical information on protecting sensors from damage and prohibited substances.
Procedures for reporting issues and returning products for maintenance.
Details for Ace Dragon Corp., including contact numbers and web presence.
General| Brand | Dr. Storage |
|---|---|
| Model | F1 |
| Category | Storage |
| Language | English |
To Next Page