Dräger 8000 IC - Detailed Description of Incubator 8000 IC; SC; NC Sub-Assemblies; Heating Unit

6141.22X Incubator 8000 IC/SC/NC
Function Description
09.99 Page 30 of 49
2.3.2.9 10 Minute Test
The 10 minute test is implemented to test every 10 minutes all testable hardware safety
functions.
3 Detailed description of Incubator 8000 IC / SC / NC sub-assemblies
- Heating unit
- Electronics module:
a. Keyboard
b. PCB Display Air Temperature
c. PCB Display Options
d. PCB Display Humidity (only Inc. 8000 SC)
e. PCB CPU
f. PCB Analog
g. PCB Power Pack
h. PCB Motherboard
i. PCB Switch
j. PCB Fan
k. Voltage regulator on side panel
l. PCB Filter
- Air temperature sensor (only Inc. 8000 SC / NC)
- Environmental sensor housing (only Inc. 8000 IC)
- Skin temperature sensor
- Valve block (only Inc. 8000 IC)
3.1
Heating unit
- The following function blocks may be found on the unit:
- Fan motor
- Air heating with over-temperature protection (unsoldering protection)
- Humidifier with over-temperature protection (manually re-settable)