Operation
107
Operating Instructions Caleo, Software 2.n
Configuration
Configuring alarm settings
From the configuration mode selection menu:
1 Turn and press rotary knob to configure alarms.
– The menu that is then displayed allows the user to select
Kangaroo Mode alarm settings, the initial volume of audible
alarms and the alarm thresholds for temperature control and
O
2 control.
1 Turn rotary knob to select menu item.
1 Press rotary knob to confirm menu item.
z To cancel a selection, press » « soft key.
– The display returns to the configuration mode selection
menu (see page 104).
Kangaroo Mode:
The text items in the description that follows are examples:
1 Select skin alarm T1 min (lower alarm limit for skin
temperature) = turn and press the rotary knob.
– When selected, the setting for "alarm skin T1 min" is
highlighted by a bold frame.
1 Turn rotary knob to select alarm setting.
1 Press rotary knob to confirm alarm setting.
The display returns to the alarm settings menu (see above).
The other alarms are set using the same method.
z To cancel a selection, press » « soft key.
– The screen returns to the configuration mode selection
menu (see page 104).
For a description of Kangaroo Mode alarms, please refer to
page 157.
Setpoint ranges:
Skin alarm T1 min 33
o
C to 37
o
C and off
Skin alarm T2 min 33
o
C to 37
o
C and off
dT alarm min –2
o
C to 2
o
C and off
dT alarm max 2
o
C to 5
o
C and off
Default values: last settings
To Next Page
Loading...
