Operation
91
Operating Instructions Caleo, Software 2.n
Selecting Menus
The previously set values for
– Humidity (page 82) and
–O
2 (page 86) are retained in Kangaroo Mode.
The previous set value for skin temperature control is stored in
buffer memory.
Activating Kangaroo Mode
For a description of Kangaroo Mode, see page 156.
1 Press »menu« key to display the main menu.
Select "Kangaroo Mode" from the menu.
2 Turn rotary knob to select item.
2 Press rotary knob to confirm and activate item.
– The screen displays the following advisory message:
»To leave the current mode please confirm the new
Kangaroo Mode with rotary knob«.
2 Press rotary knob to confirm Kangaroo Mode.
– Kangaroo Mode is highlighted on screen by a light
background when activated.
– The duration of Kangaroo Mode can be displayed on the
screen in minutes and seconds (mm:ss).
Suppressing of audible alarms is automatically activated, i.e.,
alarms listed below occurring within the next 4 minutes are
automatically displayed as "acknowledged" for the respective
period:
– Air temperature too low
– Kangaroo Mode (see page 157)
– Humidity too low
–O
2 concentration too low
If you are working in the extended setpoint range (Air or O
2),
the yellow bar LED will stay continuously lit.
See "Suppressing Alarms", page 111.
To Next Page
Loading...
