EasyManua.ls Logo

Dräger Infinity Delta XL - Scio Four;Scio Four Oxi;Scio Four plus;Scio Four Oxi plus Module

Dräger Infinity Delta XL
614 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MONITORING A CCESSORIES
VF8 DELTA/DELTA XL/KAPPA B-27
S
CIO Four/SCIO Four Oxi/SCIO Four plus/SCIO Four Oxi plus
Module
Physical Attributes
Size (H x W x D) with watertrap: 115 x 190 x 270 mm (4.8 x 7.5 x 10.5 in)
Weight: Scio Four:3.024 Kg (6.66 lbs)
Scio Four Oxi:3.444 kg (7.59 lbs)
Scio Four plus:3.037 kg (6.69 lbs)
Scio Four Oxi plus:3.457 kg (7.62 lbs)
Cooling: Fan
Mains frequency: 50/60 Hz
Power requirement: <0.8 A at 100 to 120 VAC; <0.4 A at 200 to 240 VAC
Chassis leakage current: 300 A (per UL 544)
A (per IEC 60601-1)
Electric shock protection: Type BF
Protection class: Class 1
Mode of operation: Continuous
Power: from specified power supply
Sound pressure level 45 dB(A)
Air ingression, leakage <45 ml during zeroing, <10 mL/min leakage
Sample flow rate 150 ±20 mL/min
(or 200 ±20 mL/min, if so specified on back-panel)
Environmental Requirements
Temperature range: Operating:10 to 40 °C (50 to 104 °F)
Storage: –20 to 70 °C (–4 to +158 °F)
Relative humidity: Operating:5 to 90 %
Storage: 5 to 95 %
Atmospheric pressure Operating:525 to 795.1 mmHg (70 to 106 kPa)
Storage: 375 to 795.1 mmHg (50 to 106 kPa)
NOTES:
Readings comply to ATPS conditions.
This device is not intended for use in the presence of flammable gases.
Regulatory Requirements
Standards: IEC 60601-1, ISO 21647:2004 with Corri. 1:2005 (applicable
sections only, Oxygen analyzers for monitoring patient
breathing mixtures); EN ISO 21647:2009

Table of Contents

Other manuals for Dräger Infinity Delta XL

Related product manuals