,,
---
_...___..
_.,.L._
:
Attachment of carrying strap on back
event of constant mobile use outside the
of device
rescue vehicle
-
the carrying strap can
If the carrying strap is constantly in
use-
be secured in position in the slots in the
e. g. including cases where Oxylog is
Oxylog housing. See attachment
dia-
accommodated in holder and in the
gram in Fig. 7.
Fig.
7
Attaching
carrying
strap
on
back
of
device
Initial
Preparation
An inlet pressure at the device
(com-
The functioning of the Oxylog can be
pressed-gas connection 13 in Fig. 2) of
checked with the compressed-gas
at least 2 bar at a flow rate of 60
L/min
is
source (see
B>Functional
Check<<
on
required for operation of the Oxylog.
page 11).
The drive sources used (central gas
’
1
supply or gas cylinder with pressure
reducer) must always comply with the
(
aboveprerequisite.
Operation from a central gas supply
Screw
OJair
connecting hose (3 m or 5
Any upstream closing or metering
m, see Order List) to device and insert
elements must be fully open!
connector into wall outlet valve.
8
,.
.
”
To Next Page
Loading...
