Need help?Do you have a question about the Dräger Polytron 8700 IR and is the answer not in the manual?
General| Measurement Principle | Infrared (IR) |
|---|---|
| Display | LCD with backlight |
| Measuring Range | 0 to 100% LEL |
| Output Signal | 4 to 20 mA |
| Protection Class | IP66 |
| Operating Humidity | 10 to 95 % RH, non-condensing |
| Enclosure | Stainless steel |
| Certifications | ATEX, IECEx |
| Operating Temperature | -40 to +65 °C |
Essential safety guidelines and warnings for product use.
Specifies environmental and operational limits for safe use.
Steps to prepare and start the instrument for operation.
Specifies the product's designated purpose and applications.
Procedures for physically mounting the instrument.
Guidelines for connecting power and signal cables.
Understanding the instrument's display and status indicators.
Steps and equipment needed before starting calibration.
Procedure to set the instrument's zero point.
Procedure to calibrate the instrument's span.
Using the automated zero and span calibration function.
Identifies fault numbers, causes, and remedies.
Lists warning numbers, causes, and recommended actions.
How to perform a bump test to verify alarm function.
Procedures for replacing the instrument's sensor.
Understanding and configuring the instrument's relays.
Setting up alarm thresholds, direction, latching, and acknowledgment.
Configuring the analog 4-20mA output signal.
Specific sensor settings for the Polytron 8100 EC.
Sensor configuration for CAT and IR models.
Sensor configuration for the 87x0 IR model.
Specifies the measurement ranges for different sensors.
Details of EU-Type Examination Certificate for safety standards.
Details of Type Examination Certificate for performance standards.
To Next Page