PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
6 - 6
6. Remove the suction bottle and filter from the right side of the column
or from the front of the bassinet.
Assembly After Cleaning
1. Return the mattress to the bassinet.
2. Return the x-ray cassette tray.
3. Insert the pins of the bassinet back panel in the corner brackets, and return it to the unit.
4. Push the bassinet side panels straight down into their slots.
5. Return the bassinet front panel to the unit:
a. Slide the bassinet front panel into the front of the bassinet until the release tabs catch.
b. Raise the bassinet front panel into position.
6. If a reusable suction bottle is in use, install a new suction filter.
7. If a disposable suction bottle is in use, replace it.
To Next Page
Loading...
