Dräger WBR82 User Manual

WARNING
To properly use this medical device, the user must
obtain a full understanding of the performance
characteristics of this medical device prior to use
by carefully reading these Instructions for Use.
Radiant Warmer Products
Models WBR82, RW82, and WMRW82
International Version
Instructions for Use
Air-Shields Resuscitaire

Dräger WBR82 Specifications

General

Brand	Dräger
Model	WBR82
Category	Medical Equipment
Language	English

Summary

Section 2: Introduction, Features, and Specifications

Warmer Module

Resuscitation Module (Optional)

Alarms

Lists and describes the various alarms and indicators on the controller.

Features of the Resuscitaire Birthing Room Warmer (WBR82)

Highlights specific features of the WBR82 model.

Features of the Resuscitaire Radiant Warmer (RW82)

Highlights specific features of the RW82 model.

Features of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82)

Highlights specific features of the WMRW82 model.

Specifications

Section 3: Precautions and Safety Tips

Precautions

General safety precautions for using the device.

Electrical Precautions

Safety measures related to electrical hazards.

Explosion Precautions

Safety measures regarding explosion risks, especially with oxygen.

Oxygen Precautions

Safety measures related to oxygen administration and handling.

Low-Flow Microblender Precautions

Specific safety advice for the low-flow microblender.

Resuscitation Precautions

Safety measures for using resuscitation equipment.

Suction Precautions

Safety measures for operating the suction feature.

System Precautions

Electromagnetic Compatibility Precautions

Safety Tips

General advice for safe operation and handling.

Section 4: Installation and Assembly

Installation

Overview of the installation process for different models.

Assembly of the Resuscitaire Birthing Room Warmer (WBR82)

Step-by-step guide for assembling the WBR82.

Assembly of the Resuscitaire Radiant Warmer (RW82)

Step-by-step guide for assembling the RW82.

Assembly of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82)

Step-by-step guide for assembling the WMRW82.

Mounting of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82)

Specific instructions for mounting the wall-mounted unit.

Operational Checkout Procedure

Procedure to verify correct operation before use.

Section 5: Instructions for Use

Controls, Indicators, and Connectors (Resuscitaire Birthing Room Warmer (WBR82) shown)

Baby Temp alarm indicator

Details the baby temperature alarm indicator.

High Temp alarm indicator

Details the high temperature alarm indicator.

Probe alarm indicator

Details the probe failure alarm indicator.

Controller Rear Panel Controls and Connectors

Controls and Power Connections for the VHA Model

Resuscitation Module Controls, Indicators, and Connectors

Rate (BPM) control (AutoBreath™ Infant Resuscitator Option)

PEEP control (AutoBreath™ Infant Resuscitator Option)

Resuscitation Module

Operation guide for the resuscitation module.

Controller

Operation guide for the controller.

Pre-Warm Mode

Manual Mode

Baby Mode

Cart and Bassinet

Section 6: Cleaning, Maintenance, Replacement Parts, and Storage and Handling

Cleaning

General guidelines for cleaning the equipment.

General Cleaning

Recommended procedures for routine cleaning.

Cleaning Agents

Disassembly for Cleaning

Assembly After Cleaning

Maintenance

General guidelines for equipment maintenance.

Calibration

Information on equipment calibration procedures.

Replacement Parts

Storage and Handling

Section 7: Troubleshooting

Troubleshooting

General guidance for troubleshooting issues.

System Fail Error Codes

List and explanation of system failure error codes.