To Next PageTo Next Page
Need help?Do you have a question about the Dräger X-plore 2100 and is the answer not in the manual?
General| Type | Half mask |
|---|---|
| Material | Silicone |
| Size | S, M, L |
| Valve | Yes |
| Standard | EN 140 |
| Filter connection | RD40 |
| Protection level | FFP2 |
Crucial safety guidelines for product use, user competence, and regulatory compliance.
Explanation of warning, caution, and notice icons used in the document for user awareness.
Lists and describes the main components of the Dräger X-plore 2100 half mask.
Specifies the intended application and operating conditions for the air purifying respirator.
Lists the standards and regulations the air purifying respirators comply with.
Details the information and markings found on the mask and its components.
Defines storage symbols, caution notices, and respiratory protection pictograms.
Critical conditions and warnings before using the air purifying respirator.
Specific requirements for entrepreneurs and users in Europe regarding PPE fit and suitability.
Step-by-step instructions for fitting the filter and donning the half mask correctly.
NIOSH requirements for ensuring correct facepiece size and performing a fit test.
Defines the schedule for inspection, cleaning, and replacement of components.
Step-by-step guide for cleaning and disinfecting the mask using water and detergent/disinfectant.
An alternative method for cleaning and disinfecting the mask using a combined agent.
Instructions to examine all parts for cracks, brittleness, or deformation.
Procedure for removing, inspecting, and reinserting the exhalation valve disc.
Lists approved filter types (P100, R95) and their efficiency levels for different facepieces.
Crucial warnings, limitations, and requirements for the safe use of approved respirators.
