Do you have a question about the Dräger FPS 7000 and is the answer not in the manual?
The facepiece must be inspected and serviced by experts at regular intervals.
Provides guidance on selecting the correct size and ensuring a proper seal.
Step-by-step instructions on how to put on the facepiece correctly.
Procedures for performing a fit check to ensure a proper seal.
Instructions on how to remove the facepiece safely.
Provides a table detailing inspection and maintenance schedules.
Details the importance of cleaning and the methods to use.
Explains how to perform leak tests using specific devices.
| Visor Material | Polycarbonate |
|---|---|
| Facepiece Material | Silicone or EPDM |
| Approval | EN 136 class 3 |
| Type | Full-face mask |
| Standards | EN 136 Class 3 |












Loading...