To Next PageTo Next PageHow to fix a general error or defect on Dräger X-plore 8000 Respiratory Product?
If you encounter a general error or defect with your Dräger Respiratory Product, re-insert the rechargeable battery in the battery charger. If the error occurs repeatedly, have Dräger Service check the battery charger and rechargeable battery.
Why is the status LED flashing red on my Dräger Medical Equipment?
If the status LED on your Dräger Medical Equipment is flashing red, it indicates a general error or defect. Try re-inserting the rechargeable battery into the battery charger. If the error persists, have Dräger Service check both the battery charger and the rechargeable battery.
What to do if a segment of the battery status indicator is flashing red on my Dräger Medical Equipment?
If a segment of the battery status indicator is flashing red on your Dräger Medical Equipment, it means the remaining battery runtime is low (less than 30 minutes). Recharge the battery as soon as possible or replace it with a fully charged one.
What to do if a segment of the particle filter residual capacity indicator is flashing red on my Dräger Medical Equipment?
If a segment of the particle filter residual capacity indicator is flashing red on your Dräger Medical Equipment, it means that the particle filter residual capacity is low (less than 20%). You should change the particle or combination filter.
What to do if one segment at a time is flashing red on my Dräger Medical Equipment?
If one segment at a time is flashing red on your Dräger Medical Equipment, the general system device must be error checked by Dräger Service.
How to fix a flashing yellow battery status indicator on Dräger Medical Equipment?
If a segment of the battery status indicator is flashing yellow on your Dräger Medical Equipment, it is recommended to recharge the battery soon or replace it with a fully charged battery.
What to do if the flow rate indicator is flashing red on Dräger Medical Equipment?
If a segment of the flow rate indicator is flashing red on your Dräger Medical Equipment, re-check the device function and prepare for use.
What to do if the status LED is flashing red on my Dräger Respiratory Product?
If the status LED on your Dräger Respiratory Product is flashing red, it means you should recharge the battery soon or replace it with a fully charged one.
When to change the particle filter on Dräger X-plore 8000?
If the particle filter residual capacity of your Dräger Respiratory Product is low (less than 20%), you should change the particle or combination filter soon.
What to do if a segment of the particle filter residual capacity indicator is flashing yellow on my Dräger Respiratory Product?
If you see a segment of the particle filter residual capacity indicator flashing yellow on your Dräger Respiratory Product, it means you should change the particle or combination filter soon.
General| Product Type | Powered Air-Purifying Respirator (PAPR) |
|---|---|
| Protection Class | TH3 |
| Charging Time | Approximately 4 hours |
| Air Flow | Minimum 170 l/min |
| Display | LCD with status information |
| Filter Type | Particle filters, gas filters, or combination filters (depending on the application) |
| Alarm | Visual and audible alarms for low battery |
| Approvals | EN 12941 |
| Battery Life | Up to 4-20 hours (depending on battery and operating conditions) |
Crucial safety guidelines for using the product and associated components.
Explains the meaning of warning symbols like WARNING, CAUTION, and NOTICE used in the document.
Provides a high-level view of the powered air purifying respirator and its components.
Lists and describes the individual parts of the respirator system.
Details the blower unit, including its control panel and external features.
Describes respiratory filters and inlet coverings, referring to separate instructions.
Lists available breathing hoses and their connector types.
Details the different carrying systems available for the device.
Describes the rechargeable batteries, including status indicators and types.
Explains how the powered air purifying respirator works.
Specifies the intended applications and protections offered by the device.
Lists situations and environments where the device should not be used.
Lists situations and environments where the device should not be used.
Refers to specific NIOSH cautions found on a separate approval label.
Details the device's approvals and compliance with regulatory standards.
Explains symbols and labels found on the device and its packaging.
Explains the information found on the product's name plates.
Provides instructions for product packaging and storage conditions.
Covers the procedures for using the Dräger X-plore 8000 respirator.
Outlines the necessary conditions and precautions before using the device.
Details the steps to prepare the device for operation.
Provides guidance on operating the respirator safely and effectively.
Explains how to adjust the airflow rate during operation.
Describes how to respond to warnings and alarms during use.
Provides instructions on what to do after using the device.
Covers common issues and their solutions for the respirator system.
Lists possible warnings and their corresponding remedies.
Details alarms for the blower unit and battery charger, with remedies.
Lists faults and remedies specific to the blower unit's alarms.
Lists faults and remedies for the standard battery charger.
Outlines maintenance procedures and intervals for the device.
Outlines the recommended schedule for maintenance tasks.
Provides detailed procedures for cleaning and disinfecting the device.
Step-by-step guide for cleaning and disinfecting the device in the USA.
Step-by-step guide for cleaning and disinfecting the device outside the USA.
Details specific maintenance tasks for the respirator components.
Details how to perform visual checks on the device components.
Instructions for removing, inserting, and charging the rechargeable battery.
Step-by-step guide for removing and inserting respiratory filters.
Instructions for verifying the device's flow rate and alarm functions.
Guide for replacing O-rings on hose connectors.
Guidelines for transporting the device safely.
Instructions for storing the device and its components.
Guidance on how to dispose of the device according to regulations.
Presents technical specifications, battery data, and charger details.
Presents overall technical specifications of the system.
Provides technical data for standard and long-life rechargeable batteries.
Details the technical specifications of the standard battery charger.
