Need help?Do you have a question about the Dragino LoRaWAN LDS02 and is the answer not in the manual?
General| LoRaWAN Class | Class A |
|---|---|
| Communication Protocol | LoRaWAN |
| Operating Temperature | -20°C to +60°C |
| PIR Detection Angle | 120° |
| Frequency Band | EU868 / US915 / AU915 |
| Sensors | PIR |
| Battery | 3.6V Lithium Battery |
| Battery Life | Up to 5 years |
Explains the Dragino LDS02 sensor, its function, power, and LoRaWAN registration.
Lists key features of the LDS02, including LoRaWAN class, frequency, core, detection type, power, and upgradability.
Outlines various applications for the LDS02, such as smart buildings, logistics, and smart cities.
Provides the physical dimensions of the LDS02 device.
Refers to firmware updates and links to download them.
Explains the default LoRaWAN OTAA Class A mode and how the LDS02 joins the network.
Details steps and network structure for joining the TTN V3 network using the LDS02.
Details the structure and meaning of the 10-byte uplink payload from the LDS02.
Lists downlink command types, their codes, and payload sizes for controlling the LDS02.
Guides on integrating the LDS02 data from TTN V3 with the Datacake platform.
Explains how to configure the timeout feature for alarm notifications using AT commands or downlink.
Describes the LED behavior on the LDS02 for different actions like power on, joining, and sending data.
Details the type of batteries used (AAA LR03) and how to replace them in the LDS02.
Guides users on analyzing battery life using a provided calculator and input parameters.
Explains how to connect to the LDS02 using a USB to TTL adapter and serial tool for AT commands.
Provides instructions and a link for upgrading the LDS02 firmware.
Explains how to change frequency bands/regions by following firmware upgrade instructions.
Details methods (AT command, downlink) to disable event-based uplinks for battery saving.
To Next Page
