www.dragino.com
LoRaWAN Door Sensor User Manual 15 / 24
4.5 Integrate with Datacake
Datacake provides a human friendly interface to show the sensor data, once we have data in
TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are
the steps:
Step 1: Be sure that your device is programmed and properly connected to the network at
this time.
Step 2: To configure the Application to forward data to Datacake you will need to add
integration. To add the Datacake integration, perform the following steps:
To Next Page
Loading...
Need help?
General
