www.dragino.com
LSN50 LoRa Sensor Node User Manual 11 / 60
2.2 Quick guide to connect to LoRaWAN server (OTAA)
Following is an example for how to join the TTN LoRaWAN Network. Below is the network
structure; we use the LG308 as a LoRaWAN gateway in this example.
The LG308 is already set to connected to TTN network , so what we need to now is configure
the TTN server.
Step 1: Create a device in TTN with the OTAA keys from LSN50.
Each LSN50 is shipped with a sticker with the default device EUI as below:
To Next Page
Loading...
