Dragino LT Series User Manual

www.dragino.com
LT Series LoRa IO controller User Manual 22 / 42
h) A9 00 11 01 00 07 D0
DO1 pin no action, DO2 pin set low, DO3 pin set high , last 2 seconds, then DO1 pin no action,
DO2 pin set high, DO3 pin set low
3.5 Integrate with Mydevice
Mydevices provides a human friendly interface to show the sensor data, once we have data
in TTN, we can use Mydevices to connect to TTN and see the data in Mydevices. Below are
the steps:
Step 1: Be sure that your device is programmed and properly connected to the network at
this time.
Step 2: To configure the Application to forward data to Mydevices you will need to add
integration. To add the Mydevices integration, perform the following steps:

Dragino LT Series Specifications

General

Brand	Dragino
Model	LT Series
Category	Controller
Language	English