Dragino LT Series User Manual

www.dragino.com
LT Series LoRa IO controller User Manual 5 / 42
1. Introduction
1.1 What is LT Series I/O Controller
The Dragino LT series I/O Modules are Long Range LoRaWAN I/O Controller. It contains different
I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and
digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides
ultra-long range spread spectrum communication and high interference immunity whilst
minimizing current consumption. It targets professional wireless sensor network applications
such as irrigation systems, smart metering, smart cities, smartphone detection, building
automation, and so on.
The LT I/O Controllers is aiming to provide a simple plug and play, low cost installation by using
LoRaWAN wireless technology.
The use environment includes:
1) If user’s area has LoRaWAN service coverage, they can just install the I/O controller and
configure it to connect the LoRaWAN provider via wireless.
2) User can set up a LoRaWAN gateway locally and configure the controller to connect to the
gateway via wireless.

Dragino LT Series Specifications

General

Brand	Dragino
Model	LT Series
Category	Controller
Language	English