Draper BS190 - Unpacking and Checking Contents; Initial Unpacking and Verification

UNPACKING AND CHECKING CONTENTS
WARNING
For your own safety, do not connect the plug to the power supply until all the assembly steps are
completed and you have read and understood the safety and operational instructions.
Carefully unpack the bandsaw and all the loose items from the carton. The photograph below, illustrates
the bandsaw and all the loose parts. Referring to Fig.1. Check that all the parts are present.
- 8 -
If any parts are missing or damaged please contact the stockist where your purchase was made or call the
Draper Helpline on (023) 8049 4344.
Fig.1.