Draper BS355A User Manual

360mm BANDSAW
■ STOCK No.36761 ■ PART No.BS355A
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
12/2000

Draper BS355A Specifications

General

Brand	Draper
Model	BS355A
Category	Saw
Language	English

Summary

Specification and Guarantee Details

Specification Details

Technical specifications of the 360mm Bandsaw.

Power Supply Connection

General Safety Instructions for Power Tools

Personal Safety Practices

Covers user safety, work area, clothing, and protective gear.

Operational Safety Measures

Covers electrical safety, alertness, tool handling, and maintenance.

Tool Usage and Routine Checks

Covers proper tool use, securing work, and routine checks.

Additional Safety Rules for Bandsaws

Blade Guard and Hand Safety

Focuses on blade guard adjustment and keeping hands clear.

Machine Setup and Security

Covers adjustments, securing parts, and bench fastening.

Operational Precautions

Addresses jammed material, noise, vibration, and door closures.

Unpacking and Checking Contents

Pre-Connection Safety Warning

Warning against connecting power before assembly and reading instructions.

Getting to Know Your Bandsaw

Assembly Instructions

Worktable Attachment Steps

Detailed procedure for attaching the worktable to the bandsaw.

Operation and Use: Switches and Speeds

Power Switch Operation

Details on the ON/OFF switch and the no volt switch function.

Speed Change Procedure

Operation and Use: Changing Blades

Blade Removal and Installation

Steps for removing the old blade and fitting a new one.

Blade Tensioning and Tracking

Adjusting blade tension and ensuring correct tracking on wheels.

Blade Guide and Support Adjustment

Tips on Using Your Bandsaw

Bandsaw Blade Selection

Bandsaw Operational Techniques

Blade Guard and Work Handling

Cutting Nonferrous Metals

Maintenance Procedures

Changing Tyres