Draper MS250 - GETTING TO KNOW YOUR COMPOUND MITRE SAW; Component Identification

- 7 -
GETTING TO KNOW YOUR
COMPOUND MITRE SAW
Fig.1 & 2:
1. Base.
2. On/off trigger switch.
3. Locking level.
4. Blade guard lower.
5. Blade guard upper.
6. Mitre scale.
7. Bevel scale.
8. Fence and scale.
9. Dust bag.
10. Dust port.
11. Spindle lock.
12. Bevel locking handle.
13. Mitre locking assembly.
14. Saw head locking pin.
15. Blade.
16. Blade flange wrench.
17. Work piece clamp.
18. Work piece supports.
19. Work piece adjustable end stop.
20. Adjustable stops.
✗✌
✖✌
✕✌
✕✛✌ ✚✌
✕✗✌
✕✢✌
✙✌
✕✔✌
✕✜✌
✕✘✌
✕✙✌
✜✌
✖✔✌
✢✌
✕✖✌
✕✚✌
✘✌
✕✕✌
✛✌
Fig.1.
Fig.2.