Draper TABLE SAW User Manual

10" TABLE SAW
■ STOCK No.65839 ■ PART No.BTS251
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
04/2002

Draper TABLE SAW Specifications

General

No Load Speed	5000rpm
Blade Diameter	250mm
Max Cutting Depth at 90°	75mm
Max Cutting Depth at 45°	53mm
Motor Power	1500W
Weight	24kg

Summary

Specifications

Power Supply

Connecting to Power Supply

Guidance on connecting the machine to the mains power supply, including plug and cable preparation.

Earth Connection Safety

General Safety Instructions

Additional Safety Rules

Assembly

Fitting the Blade Guard

Rip Fence Alignment

Steps to align the rip fence parallel to the blade for safe operation and accurate cuts, including adjustment screws.

Adjusting the Riving Knife

Mitre Gauge Setup

Operation & Use

Blade Height and Tilt Adjustment

Procedure for adjusting saw blade height, bevel angle, and tilt accuracy using adjustment knobs and bolts.

Riving Knife and Anti-Kick Back Pawls

Importance and function of the riving knife and anti-kick back pawls for preventing kickback.

Replacing the Saw Blade

Cutting Operations

Cross Cut Alignment Checks

Ripping Procedure

Rip Cut Binding Checks

Steps to identify and resolve blade binding issues during ripping operations by checking fence and blade alignment.

Cross Cutting Procedure

Maintenance

Checking Blade Parallelism

Adjusting Blade Parallelism

Trouble Shooting