Section 10 - Case Length Dimensions
Section 11 - Case Width Dimensions Section 12 - Mounting Bracket Dimensions
Series E
Viewing Surface
Series V
Viewing Surface
L*
2
"
(54mm)
ULTIMATE
ACCESS
18"
(457mm)
2"
(51mm)
*L = Varies
"
(19mm)
"
(22mm)
CASE LENGTH
Standard Motor Wiring is on the
AUDIENCE LEFT END of Screen Case.
9
"
(251mm)
2
"
(67mm)
3
"
(79mm)
7
"
(187mm)
"
(13mm)
7
"
(187mm)
6
"
(171mm)
8"
(203mm)
9
"
(240mm)
"
(11mm)
2"
(51mm)
9
"
(232mm)
"
(22mm)
"
(16mm)
"
(11mm)
1"
(35mm)
9 "
(232mm)
7 "
(200mm)
3 "
(86mm)
Series E
Viewing Surface
Series V
Viewing Surface
L*
2
"
(54mm)
18"
(457mm)
2"
(51mm)
*L = Varies
"
(19mm)
"
(22mm)
CASE LENGTH
Standard Motor Wiring is on the
AUDIENCE LEFT END of Screen Case.
9
"
(251mm)
2
"
(67mm)
3
"
(79mm)
7
"
(187mm)
"
(13mm)
7
"
(187mm)
6
"
(171mm)
8"
(203mm)
9
"
(240mm)
"
(11mm)
2"
(51mm)
9
"
(232mm)
"
(22mm)
"
(16mm)
• For minimum length of ceiling cutout: subtract 1
¼
"
(32mm)
from case length
(measured from outer edge of flanges)
.
• For minimum width of cutout
(front to back)
: see case width dimensions below.
• ** Leveling bracket is used to level the case and should NOT be used to support the weight of the unit.
• The leveling bracket is screwed to the side of the case. Hardware used for leveling provided by others.
• There are several knock-outs in the screen housing to allow the Leveling Bracket to be adjusted laterally up to 16"
(40.6cm)
in either direction.
page 6 of 7
Ultimate Access E and V 220V
To Next Page
Loading...
